Skip to Content
Last modified by Alexandru Pentilescu on 2025/02/09 14:17
From version 2.1
edited by Alexandru Pentilescu
on 2022/11/13 20:58
Change comment: There is no comment for this version
To version 3.1
edited by Alexandru Pentilescu
on 2022/11/13 21:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -95,7 +95,7 @@
95 95  
96 96  Finally, there's the "inet_interfaces" configuration parameter. This one specifies under which identities the current installation of Postfix will be assumed by the server. Postfix will accept all requests destined to any of these addresses as its own and will handle them.
97 97  
98 -In a docker configuration, assuming the services are using a "bridge" network driver, they will all have their own IP addresses in the aforementioned address space, and these addresses will be distinct from the proper address of the machine where Postfix is installed. As such, they need a target to resolve to reach the machine running Postfix. This target will be IP 172.17.0.1. When configuring each individual docker service, enter that IP as the IP of the SMTP server to use, as well as port 25, as its connection port. These should be the only parameters you should need to configure everything to work properly. 172.17.0.1 was a random address that I decided on. Really, it has no real relevance and can be changed to any private IPv4 address, whether in class B, C or A. The only point is that it should be reachable through this network driver.
98 +In a docker configuration, assuming the services are using a "bridge" network driver, they will all have their own IP addresses in the aforementioned address space, and these addresses will be distinct from the proper address of the machine where Postfix is installed. As such, they need a target to resolve to reach the machine running Postfix. This target will be IP 172.16.0.1. When configuring each individual docker service, enter that IP as the IP of the SMTP server to use, as well as port 25, as its connection port. These should be the only parameters you should need to configure everything to work properly. 172.16.0.1 was a random address that I decided on. Really, it has no real relevance and can be changed to any private IPv4 address, whether in class B, C or A. The only point is that it should be reachable through this network driver.
99 99  
100 100  
101 101  = Troubleshooting issues with Postfix reachability from docker containers=